Go sculptural!
Are you an adventurous artist ready to push boundaries and apply advanced techniques? If you answered yes, this project is for you.
The beauty of pattern bars is that they can be made in a wide variety of sizes, styles, shapes, and designs. The idea is to create a decorative element that can be cut into pieces and reassembled to make a unique and ornate focal point within your art.
Another nice thing about pattern bars is you can work small and still make a huge impact. So, don’t hesitate to try making your own decorative elements even if you’re new to fusing or have a small kiln. All you need is a little imagination and heat resistant material to contain your glass during fusing.
When I came up with the idea to fuse an inverted stack of glass, I wasn’t exactly sure what the resulting slab would look like. I didn’t let the unknown stop me from trying. I knew the hot glass would fill the open space in the container I created, but I wasn’t sure if the design would retain its linear appearance or if it the colors would blend together. As luck would have it, I got a little bit of both.
To make Reflection I stacked 16 pieces of glass. I started by cutting 3-inch-wide strips from select opal glass colors and transparent glass colors. I also cut 3-inch-wide strips of clear glass. The 3-inch-wide strips were then cut to different lengths. No two pieces were the same length. I alternated color glass and clear glass. The glass was then stacked on the kiln shelf with the shortest piece down on the kiln first. Each consecutive layer was longer than the previous layer. It was like building an upside-down pyramid.
Tip:
When selecting my glass, I like to use a combination of opal glass, clear glass and transparent color glass. Each type of glass brings its own special facet to the pattern. Opal colors show off the intricacy of the pattern well. Clear glass boosts the visual depth of the design, while transparent colors give the finished artwork a regal jewel tone quality.
When I fused the stacked glass, I contained it with ½ inch thick strips of fiber board. I use fiber board kiln shelves in my kilns. When they get damaged, I cut them down and use them as dams to contain thick glass. My firing guide is below.
Why do you have to dam the glass you ask?
When stacked glass is fired to the full fuse temperature of 1465 degrees Fahrenheit it will spread out to a ¼ inch thickness. To construct thicker projects, we contain the glass with props, in this case fiber board. The fiber board is then held in place with kiln posts.
Tip:
When I mention materials that I use in my kilns, like fiber board, I’m always referring to materials that I purchase from my art glass supplier specifically for kiln use. Don’t substitute other building materials from your local hardware store to save money. It will cost you in inconsistent results and possible kiln damage.
After the glass is fired the pattern bar was cut into long ¼ inch thick slabs with a wet saw. I use an inexpensive tile saw fitted with a wet blade for my heavy-duty straight cutting. It’s fast, easy to use and gives me consistent results. The cut strips are then reassembled so the pattern on the left side is a mirror image of the pattern on the right side of the art. The glass is then fired a second time to a full fuse temperature. This bonds the pieces together and makes all of the surfaces shinny. I made two matching components. One will be used as the vertical portion of the sculpture.
I slumped the second component over a small block of ½ inch thick fiber board using the firing guide below. This element was then used as a decorative base to display the vertical portion. I glued the two pieces together with E6000 adhesive. I prop the project up and let the glue dry overnight.
Tip:
Go the extra mile and build your own custom display bases for your special pieces of fused glass. It adds a personal touch that elevates the overall quality and sophistication of your artwork.
Pattern bars are a great way to add energy to your fused glass artwork. They’re easy to make and the number of design variations and color combinations is staggering. Plus, you can work small and still have dynamic results. Next time your kiln is sitting idle try an experimental pattern bar or two. Just watch out. The low-pressure assembly combined with the thrill of unpredictable results is an addictive potion. I’m sure your new work will be both mysterious and magical.
Wherever you are in your artistic journey you’re doing great!
We’re all learning new things every day. Keep going. Enjoy the journey.
Thank you for all the positive feedback about my blog and videos. It’s your kind and encouraging support that inspires me to keep sharing.
Happy Fusing!
Lisa
Reflection is one of 10 advanced designs in my, Advanced Glass Fusing video available as a download on my website.
Check out my video.
Follow my blog for weekly inspiration sent to your inbox!
Happy Fusing!
Lisa
Upcoming Class!
Advanced Glass Fusing Class
4-Day, Hands-on Class, Wesley Chapel, FL
February 4-7, 2025
YOU can make gallery quality fused glass art! You’ll love the personalized instruction in this exciting advanced technique, artistic awakening and skill building workshop. This is the turning point experience you’ve been waiting for.
Someday is here! What are you waiting for? You’re in your prime. You’re at the peak of your interest in glass fusing. Take the next step and raise your artwork to an exciting new level of sophistication.
Join me for this intense workshop held in my private studio.
Wesley Chapel, Florida, 4-Day, Hands-on, Class size is limited.
In this class, you will push the boundaries art glass imposes. Students will explore innovative approaches to design and combine multiple advanced techniques to construct original art that reflects their own personal style. You’ll enjoy: the one-on-one instruction, making multifaceted projects, the well-equipped classroom, and the intimate class size.
You’ll love the concentrated, in-depth study and creative momentum you’ll gain while actively producing, nonstop for four consecutive days. You’ll leave class with a working knowledge of kiln operation, custom project specific firing guides, and the inspiration you’ve been craving to go bigger and do more elaborate works of fused glass art!
Join me and take your glass fusing to the next level!
Premium Video Courses by Lisa
What do you suggest if I don’t have a wet tile saw
See if you can rent time on one at a local shop, use a ring saw or band saw: just go at a paces appropriate for that saw, or make friends with someone who may have one? There are ways to get creative 🙂